switch to the U.K site >
The module consists of circuits designed to group the most useful operations for signal mingling in modular synth setups -but in the more fun manner!
It is designed in the way that the circuits can function independently or to be combined inside the module at the same time!
On the top of the module there is a buffered multiple (the bi-color led is indicating signal input and its polarity) : Next to the input there are two outputs giving the exact copy of the incoming signal. On the third output you’ll get the ‘attenuverted” version of that signal which is controllable by the dedicated attenuator/inverter potentiometer.
This signal can be further added (or muted) via its switch, internally to a unity gain mixer situated on the bottom of the module via its SUMM OUT.
This mixer has its own 3 inputs who will accept CVs as well as audio signals with an output gain of 1/3. Its bi-color led will indicate the polarity of the incoming signals.
In the center of the module there is a CV Processor consisting of two mixers each mixing two signals- in the way that:
The first one takes two signals (A and B/C and D) and outputs simultaneously the positive version of their mix (AB+ OUT/CD+ Out) and the negative version (AB- OUT/CD- OUT). Their gain is scaled by the potentiometer: going on 1x in the middle position to 2x fully turned. (After middle position with a stronger signal and due to higher gain it will start to saturate producing an distortion-like effect)
Further, via their switch, those mixes also can be added to a unity gain mix (SUMM OUT) and therefore creating a larger mix. You’ll do that by choosing which polarity output you want to send to a summing mix. In the middle position of the switch the signal is “off” so you can use this to mute/un-mute the signal in the unity mix. Also, even if it is in “off” position this only breaks the internal link to a unity mix but you can still use their distinctive outputs to send your positive and negative mixes elsewhere in your system.
Specifications
Width: 8hp
Depth: 25mm
Power: 40 mA +12V, 40 mA -12V
Manufacturer product page here.